PowerBlock Dumbbells 101
The PowerBlock Elite dumbbell
consists of three major components;
the weight stack, handle and selector
pin.
The PowerBlock Elite selector pin is
tethered to the first weight plate (rail).
This is one of many safety features
built into the design of the product
and must not be compromised.
Do not remove selector pin from
tether cord. It must remain attached
to the first weight plate as shown in
image at right.
The PowerBlock Elite uses a variable
weight handle that can be 5, 7.5 or 10
lbs.
This allows the user to micro load or
“fine tune” their weight selections
using the 2.5 lb adder weights.
When you choose to “open” the
handle to remove adder weights,
be sure to have the handle pointed
up as shown at right.
DANGER
DANGER
WORLD’S BEST DUMBBELL
6
To Next Page
Loading...
