15
The on-screen arrows should now be located in front of UP/DOWN. If you
find that your retract switch works in the wrong “sense” (direction), correct it
by reversing that output at the transmitter.
Press the SET button again to leave this function, and move the cursor to OK.
The door sequencer’s method of working is determined in the following
menu:
The following sequences are available:
Mode 1:
Extend undercarriage:
Open wheel doors
extend undercarriage
Retract undercarriage:
Retract undercarriage close wheel doors
Mode 2:
Extend undercarriage:
Open nosewheel doors
extend nosewheel
Open main wheel doors
extend main undercarriage close main wheel
doors
Retract undercarriage:
Retract nosewheel
Close nosewheel doors
Open main wheel doors
retract main undercarriage close main wheel
doors
To Next Page
Loading...
