Need help?Do you have a question about the PowerBox Systems Mercury SRS and is the answer not in the manual?
General| Voltage | 4 - 9 V |
|---|---|
| Type | Radio-Controlled (RC) Model Parts |
| Proper use | Airplane |
| Product type | Power supply |
| Compatibility | Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo |
| Product color | Black |
| Brand compatibility | Any brand |
Overview of the PowerBox Mercury SRS, highlighting its compact size and high performance for airborne systems.
Explains installation and setup procedures, including Assistants, for the Mercury SRS.
Initial steps for operating the Mercury SRS, including menu system, ON/OFF switch, and mounting guidelines.
Instructions for connecting batteries, switch, screen, receivers, and optional GPS sensor to the unit.
Procedure for powering on the PowerBox Mercury SRS, including the SET button and LED indicators.
Guide to navigating the Mercury SRS menu system using the SET, I, and II buttons.
Setting up the Mercury SRS to recognize and work with different radio control systems like Futaba, Spektrum, and Jeti.
Setting servo frame rate and configuring battery type for accurate display and performance.
Selecting the regulated output voltage for servos, switches, and valves (5.9V or 7.4V).
Step-by-step guide to configuring the Mercury SRS for your model using the integrated assistant.
Selecting the aircraft type to assign outputs correctly for your model's configuration.
Assigning flight mode switches and gain channels for optimal iGyro control.
Defining the gyro function (OFF, Rate, Attitude Assist) for each flight mode.
Assigning transmitter channels to control surfaces and functions, detecting servo configurations.
Checking and reversing gyro output directions for correct control surface response.
Assigning additional functions or re-assigning existing functions to the Mercury SRS outputs.
Linking outputs to iGyro axes for individual gain, direction, and gyro function control.
Adjusting servo center positions and endpoints for precise synchronization, especially with multiple servos.
Configuring sequences for undercarriage and wheel doors using assistants and expert menus.
Calibrating gyro sensors and setting control surface travel limits before flight.
Exploring flight recorder, time reset, manual gyro settings, and PC control.
Manually adjusting gyro values for axis, flight mode, gain, attitude assist, direction, and airspeed factor.
Detailed explanation of the door sequencer's control system using 'TASKS' for retractables and canopies.
Manually assigning transmitter channels to specific functions using the Input Mapping feature.
Setting installed orientation, aircraft type, and resetting output mapping.
Resetting the Mercury SRS to defaults and connecting to a PC for updates and control.
Details on operating voltage, battery types, current, output voltage, framerate, and channels.
Physical dimensions of the unit and a list of included package contents.
Information on support forums, 36-month guarantee conditions, and service address.
Disclaimer regarding liability for loss or damage arising from product use or operation.
To Next Page
