3
FEATURES:
Integral high-resolution graphic OLED screen with 128 x 64 pixels
Particularly user-friendly menu-based programming using the Sensor-
Switch
Door sequencer: six freely programmable outputs with set-up assistant
Channel lock when undercarriage is retracted
11 channels inclusive one channel for the doorsequencer in the Cockpit
Version
12 channels in the Competition version
8 channels in the Professional version
Signal amplification and interference suppression for all channels
Synchronised servo output for totally synchronous servo response
Variable frame rate, range 9 ms - 21 ms
16-bit processor for fast, high-resolution signal processing
Four match-channels, each for two servos. Accurate adjustment of all
eight servos
Double regulated output voltage for receivers and servos
Can be connected to Jeti, Futaba, Spektrum, HoTT and Multiplex down-
link channel bus systems
Direct transmission of battery voltages and capacities (not Professional)
to the transmitter
Separate voltage and capacity (not Professional) displays for each bat-
tery
Software-selectable servo voltage: 5.9 V or 7.4 V
Minimum value memory displays any voltage collapses
Large-area heat-sinks for high regulator power
Regulator monitor, regulator malfunction indicator
Support for three battery types: LiPo/LiIon, NiMH/NiCd, LiFePo
Suppresses any servo feedback currents which might develop
Can be updated using the PowerBox USB Interface or BlueCom adapter
To Next Page
Loading...
Need help?
General
