PowerBox Systems POWERBOX EVO User Manual

2 PowerBox-Systems − World Leaders in RC Power Supply Systems
The PowerBox Evo is an ultra-compact dual power supply featuring 7 channels,
regulated output voltage and telemetry. The 7 inputs are assigned to 12 outputs,
allowing two servos to be controlled in parallel on each of 3 channels, without re-
quiring additional Y-leads. All servo outputs have integral signal amplication and
are protected against servo feedback currents.
The PowerBox MicroSwitch included in the set is not subject to wear, and operates
both electronic switches reliably. It is also used to set the output voltage and the
battery type.
By default the two high-performance voltage regulators deliver 6.0V, but that value
can easily be changed to 7.4V, 7.8V or no regulation at all using the PowerBox
MicroSwitch. The machined aluminium heat-sink ensures a high continuous load
capacity.
The PowerBox Evo supports all current telemetry systems: PowerBox, Jeti, Futaba,
Multiplex, Graupner, Spektrum and JR, which means that the voltage of both batte-
ries can be monitored conveniently from the transmitter. It is also possible to read
off the state of charge of the batteries at any time using the two tri-colour LEDs.
Features:
• 7 channels
• 12 outputs
• High-performance battery backer with high continuous load capacity
• All power electronics duplicated
• Redundant electronic switch
• Four selectable output voltages: 6.0V, 7.4V, 7.8V or unregulated

PowerBox Systems POWERBOX EVO Specifications

General

Brand	PowerBox Systems
Model	POWERBOX EVO
Category	Power Supply
Language	English