54
55
POWERDOT
MAINTENANCE
PowerDot PD-01M device, together
with its accessories, should be kept in
the PowerDot carry case and carefully
stored on a secure surface and protected
from conditions listed in the Warnings
above.
Keep replacing your
electrode pads after 25-30
uses as recommended.
Deteriorated & worn
out pads can cause
major discomfort during
stimulation, affect the
effectiveness of the
stimulation, and even lead
to minor injury.
Cleaning: only clean your
PowerDot device using a
dry soft cloth.
Keep PowerDot device
and electrode pads away
from water. Store them in
a dry place, in protective
packaging or in the
PowerDot carry case.
PowerDot PD-01M devices do not require
calibration or verification of performance
parameters. The characteristics are
systemically verified and validated
for each device manufactured. Those
characteristics are stable and do not vary
when used under normal conditions.
The manufacturer states that PowerDot
cannot be repaired by personnel external
to the company. Any work of this nature
carried out by personnel not authorized
by the manufacturer will be classified as
tampering with the unit, releasing the
manufacturer from any responsibility
with regards to the warranty and
hazards that the operator or user may be
exposed to.
POWERDOT
WARRANTY
PowerDot PD-01M is covered by a
worldwide warranty of 1 year, which
comes into effect on the date of purchase
of the device (proof of purchase is
required).
The warranty does not apply to the
electrode pads and carry cases.
Within the warranty period,
manufacturer will replace your faulty
PowerDot or accessories at no charge
(except shipping & handling fees in some
cases), provided that the product:
• Has been used for the intended purpose
and in the manner described in this
manual.
• Has not been connected to an unsuitable
power source.
• Has not been subjected to misuse or
neglect.
• Has not been modified or repaired.
• Has not been damaged further by shock.
Legal rights are not affected by this
warranty.
ELIMINATION
European Directive 2002/96/CEE
(WEEE) has a first priority, the prevention
of waste electrical and electronic
equipment, and in addition, the re-use,
recycling and other forms of recovery of
such wastes so as to reduce the disposal
of waste:
• The pictogram wheeled bin barred means
that the equipment can’t be thrown with
the household refuse, but that it makes
the object of a selective collection;
• The equipment has to be given to
a suitable collection point for the
treatment;
• By this way, you contribute to the
safeguarding of the natural resources
and the human health protection;
• Batteries must be disposed of in
accordance with your country’s national
laws governing the disposal of such
items.
To Next Page
Loading...
