14 GB/IE
Information regarding
inaccurate measurement
results
Please note that inaccurate measurement
results can be obtained under certain condi-
tions. The following conditions can cause
inaccurate measurement results:
– very thick walls
– weak battery
– deep-lying wires or pipes
– shielded AC wires
– thick walls with thin pipes or wires
– metal-clad walls
– very damp conditions
Using this appliance you cannot detect wires
in an electric circuit
– that are insulated from the mains power
supply.
– that have a direct current flowing through
them.
– that are used for computer or telecommuni-
cation systems.
This appliance is only suitable for detecting
metal pipes. You cannot detect pipes made
of plastic or other non-metallic materials with
this appliance.
To Next Page
Loading...
