To Next PageTo Next PageWhat to do if Powerfix Profi 288019 does not react?
If your Powerfix Profi Security Sensors product isn't responding, it might be due to electrostatic discharge affecting its function. To resolve this, open the battery compartment and use a pointed object to press the RESET button.
What to do if the number on the display of Powerfix Profi Measuring Instruments is not reacting?
If the number on the display of your Powerfix Profi Measuring Instruments isn't reacting, check if the lock key is activated. Press button 4 to deactivate it.
Why does Powerfix Profi Measuring Instruments display 'Lo' or 'Hi'?
If your Powerfix Profi Measuring Instruments display reads 'Lo' or 'Hi', it means the measurement range is either exceeded or not reached.
What to do if electrostatic discharges cause malfunctions in Powerfix Profi Measuring Instruments?
If electrostatic discharges cause malfunctions in your Powerfix Profi Measuring Instruments, remove the batteries briefly and then reinsert them.
Why is the measurement obviously too high or low on my Powerfix Profi Measuring Instruments?
If the measurement appears incorrect, ensure the device is configured for the correct material. Also, verify that the measuring pins are firmly pressed against the material during measurement. Repeating the measurement can also help.
Why does the display show 'Lo' or 'Hi' on my Powerfix Profi Measuring Instruments?
The 'Lo' or 'Hi' reading indicates that the measurement is either beyond the instrument's maximum range or below its minimum range.
How to fix a barely visible number on the display of Powerfix Profi Measuring Instruments?
The batteries might be low. Please refer to the 'Inserting/ changing the batteries' chapter for instructions on how to replace them.
What to do if Powerfix Profi Security Sensors do not react?
If your Powerfix Profi Security Sensors aren't responding, it might be due to electro-static discharge affecting its function. To resolve this, open the battery compartment 8 and press the RESET button 7 using a pointed object.
What to do if Powerfix Profi Analytical Instruments does not react?
If your Powerfix Profi Analytical Instruments product isn't responding, it might be due to electrostatic discharge affecting its function. To resolve this, open the battery compartment and use a pointed object to press the RESET button.
General| Brand | Powerfix Profi |
|---|---|
| Model | 288019 |
| Category | Security Sensors |
| Language | English |
Warns about Class 2 laser hazards, eye damage, and proper beam direction.
Covers dangers of swallowing, explosion, and proper handling of batteries.
Explains hazards of battery leakage and necessary protective measures.
Outlines precautions to prevent damage to the device, like using correct batteries.
Explains how to perform a basic length measurement using the device.
Provides critical conditions and tips to ensure accurate measurements.
