▲ 3. DO NOT allow children to play near your gate, or to operate the
gate.
▲ 4. DO NOT operate your gate system unless you can see it when the
gate moves.
▲ 5. Be sure a pushbutton or key switch has been installed for manual
electric operation in the event your radio or card does not work.
Any mounted control station should be located a minimum of 10
feet from the gate so the gate cannot be reached through or
touched. Any pushbutton located in a building should be installed
within sight of the gate.
▲ 6. DO NOT operate any controls without watching the movement
of the gate.