To Next PageTo Next Page
Need help?Do you have a question about the PowerMaster rsw and is the answer not in the manual?
Details general safety precautions and warnings for system designers, installers, and end users.
Explains the requirement for monitored inputs for gate operators manufactured after Jan 11, 2016.
Defines different classes of gate operators based on their intended use and installation environment.
Details entrapment zones and safety measures required for swing gates, including diagrams.
Guidelines for placing controls to prevent unauthorized access or operation by persons.
Checklists and precautions for installers before commencing gate operator installation.
Safety guidelines for installers during the physical installation process of the gate operator.
Instructions for end users on safe operation, keeping clear of the gate, and child safety.
Procedure for disengaging the operator for manual gate movement using Figure 2.
Determining the correct hand of installation based on gate swing direction.
Details on laying out mounting posts and electrical conduit, including excavation and cementing.
Steps for mounting the operator on posts and attaching the control arm assembly.
Procedure for connecting incoming power lines and ground wire, including voltage checks.
Steps to adjust the open limit switch cam for proper gate travel and stopping points.
Steps to adjust the close limit switch cam for proper gate travel and stopping points.
Instructions for wiring two units together for Master/Slave operation.
How to adjust the timer for automatic gate closing delay from 2 to 60 seconds.
Guide for installing a radio control receiver for gate operation.
Diagrams illustrating Exit, Reversing, and Shadow loop configurations for gate detection.
Details on the unit's current sensing system that stops and reverses the gate upon obstruction.
Location and adjustment of overload force settings on the circuit board for safety system sensitivity.
Instructions for installing and connecting contact-type safety edges (wired or wireless).
Information on how to activate the warranty by completing and returning the registration form.
General| Category | Gate Opener |
|---|---|
| Power Supply | 24V DC |
| Motor Type | DC |
| Control Type | Remote Control |
| Safety Features | Obstacle Detection |
