PowerMaster SG 2004 - Page 50

MAINTENANCE SUGGESTIONS
Lubricate the drive chain and idler sprocket bearings every 3
months
with 30-weight oil. Grease the drive shaft bearings every
6 months with quality grade automotive grease. The Reducer is
completely sealed and should not require lubrication. Periodically
check all hardware (nuts, bolts, screws, etc) for tightness.
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________