EasyManua.ls Logo

Powermat PM-SSZ-600 User Manual

Powermat PM-SSZ-600
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
USER MANUAL
Outboard engine
PM-SSZ-600
Question and Answer IconNeed help?

Do you have a question about the Powermat PM-SSZ-600 and is the answer not in the manual?

Powermat PM-SSZ-600 Specifications

General IconGeneral
BrandPowermat
ModelPM-SSZ-600
CategoryOutboard Motor
LanguageEnglish

Summary

Symbols and Warnings

Application Equipment

Technical Data

Safety Precautions

Prohibited Actions

Lists specific actions prohibited for safety, such as use by children or unqualified persons.

General Thoughts and Operation

Pre-Operation and Usage Advice

Covers initial checks, safe operating environments, and usage precautions.

Preparation

Preparation Steps

Details steps for unpacking, checking, and preparing the device before use.

Installation and Operation

Engine Assembly

Instructions for mounting the motor and connecting the throttle cable.

Refueling

Guidance on using unleaded gasoline 95 and prohibiting refueling on the boat.

Starting a Cold Engine

Step-by-step guide for starting the engine from a cold state, including choke and primer use.

Starting a Warm Engine

Procedure for starting the engine when it is already warm.

Pre-Departure Checks

Ensures sufficient fuel, tight bolts, and availability of life jackets before embarking.

Flushing the Engine

Procedure for cleaning the engine with fresh water after use in saltwater or polluted water.

Maintenance and Service

Fuel Tank Cleaning

Instructions for cleaning the fuel tank and filter, recommended every six months.

Fuel Filter Maintenance

Details on cleaning or replacing the fuel filter, recommended every 20 hours.

Engine Flooding Troubleshooting

Detailed steps for inspecting and drying the engine if it becomes flooded.

Spark Plug Check and Maintenance

Guide to inspecting, cleaning, or replacing the spark plug based on condition and operation hours.

Gearbox Oil Replacement

Procedure for draining and refilling the gearbox oil, recommended every 100 hours.

Propeller Maintenance

Guidance on checking for propeller damage and replacing the shear pin.

Installation and Use the Boat

Storage

Instructions for preparing and storing the engine in a dry clean room.

Mounting the Motor

Details on mounting the motor using screw terminals and securing it for transport.

Trim Angle Adjustment

How to adjust the engine's trim angle manually for optimal boat performance.

Periodic Maintenance

Removal of Used Equipment

Company Details

Scheme Device

Declaration of Conformity

Related product manuals