Powermax Tech AHE58-55 - Page 9

第 9 页 共 16 页
Mode
Parameter
Default
Rang Comment
2：Arithmetic Curve（ the parameters [33] cooperate with use）
3：S curve（the operate control is very well, slow start after fast ）
31 3000 200 ~4000
Two segment controls the speed slope：mid turning point speed
RPM（two segment of turning point speed），the parameter[30] set
to 1 effective。
3 2 800 0 ~1024
Two segment controls the speed slope：
mid turning point of pedal Simulated value，the parameter[30] set to
1 effective, the value is between[38]and[39].
3 3 2 1 /2
Arithmetic Curve supplementary parameter：
the parameter[30] set to 2 effective.
1：Square（the low speed control is very well, slow start after
fast
）；
Pedal forward angle
Speed
Pedal forward angle
Speed
Pedal forward angle
Speed
Pedal forward angle
Speed
Mid turning
point speed
Pedal forward angle
Speed
mid turning point
of pedal Simulated
Pedal forward angle
S
p
eed