To Next PageTo Next Page
Need help?Do you have a question about the powerpack GPS-TK303 and is the answer not in the manual?
Explains the working principle based on GSM/GPRS and GPS satellites.
Lists the key features of the tracker, including handheld/vehicle use and tracking solutions.
Guides on installing the tracker device, including wiring diagram.
Instructions for installing the SIM card into the tracker.
Steps to power on, initialize the tracker, and understand LED indicators.
Procedure to change the default password for security.
How to set up authorized phone numbers for device control.
How to get the current location of the tracker by calling or SMS.
Setting up continuous tracking at specified intervals.
Automatically updates vehicle positions based on turn angles.
Reduces unnecessary GPS data updates when the vehicle is stationary.
Retrieves the tracker's location as a street address via SMS.
Uses GSM network data for positioning when GPS is unavailable.
Enables listening to the audio environment around the tracker.
Stores tracking data locally when GSM signals are lost.
Loads historical tracking data to a monitoring platform.
Forwards messages from third-party SIM card to authorized numbers.
Alerts when the tracker's internal battery is low.
Notifies when the external power source is disconnected.
Allows the user to send an emergency alert with location data.
Sets virtual boundaries for movement alerts.
Manages multiple defined geographical areas for tracking.
Triggers an alert when the tracker moves from its stationary position.
Alerts when the vehicle exceeds a predefined speed limit.
Alerts when the vehicle's ignition (ACC) is turned on or off.
Allows remote disabling of the vehicle's engine by cutting oil/power.
Describes functions controllable via the remote key fob.
Steps to arm the tracker system for security.
Activates silent alarm mode for discreet monitoring or operation.
Alerts when a car door is opened while the system is armed.
Alerts when the vehicle's ignition is turned on while armed.
Alerts when the tracker detects physical impact or vibration.
Siren alarms activate locally even without GSM signal.
Retrieves current status of power, GPS, battery, and other parameters.
Restores GSM and GPS modules to their default settings.
Configures the tracker to enter low-power sleep states.
Retrieves the unique IMEI number of the tracker device.
Configures the tracker's local time zone and clock.
Essential GPRS configuration including APN, user ID, and IP.
Optimizes GPRS usage to reduce data consumption.
Switches the device's operational mode between SMS and GPRS.
Configures a central number for receiving alerts and tracking data.
Information on accessing the web platform and PC software.
General