24
6.25.3.2 Shock sensor sensitivity configuration:
The sensitivity of the built-in shock sensor has three different level:
First level: Alarm will be triggered after detect slight vibration, send
command" sensitivity+password+space+1" .
Second level: Alarm will be triggered after detect 8 times vibration in 2
seconds, send command" sensitivity+password+space+2".
Third level: Alarm will be triggered after detect 25 times vibration in 5
seconds, send command" sensitivity+password+space+3".
6.26 Alarm without GSM network service (Option for model C
and D )
When the car is in the place without GSM network service, siren will be
sound under non-silent mode if alarm is triggered (door, sensor, ACC), but
no SMS alarm will send to authorized number.
6.27 Check the Vehicle State
Send SMS command “check+password” to the tracker device in the vehicle,
It will reply the status of the power, battery, GPS, ACC, door, GSM signal,
GPRS status and oil to the authorized numbers.
For example: Send SMS “check123456” to the tracker device in the vehicle,
It will reply following SMS.
Power: ON/OFF
To Next Page
Loading...