EasyManua.ls Logo

powerpack GPS-TK303 - 7. Configuration & Basic Tracking; 6.6 Change Password; 6.7 Authorize Phone Numbers

powerpack GPS-TK303
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
For example, send SMS begin123456” to the tracker via a cell phone, if succeeded, if will reply “begin
ok”.
6.6 Change Password
6.6.1 Send SMS password+old password+space+new password” to the unit to
change the password.
For example: send SMS password123456 888888” to the unit. If succeeded,
“password ok” will reply to your cell phone from the device tracker.
6.6.2 Be sure to keep the new password in mind, you have to upload the
software to restore the original setting in case of losing the new password.
6.6.3 Attention: Make sure the new password is in 6 digits Arabic numbers, or
else the tracker cannot recognize the password.
6.6.4 The “+” in the command, please don’t type “+”, space means press the
space keyboard on your cell phone
6.7 Authorization
There are only 5 cell phone numbers able to be authorized, be sure to set the
authorization phone number before use.
6.7.1 Call the tracker for 10 times continuously and get position correctly, then
it will make the cell phone number as the authorized number automatically.
6.7.2 Authorization Send SMS“admin+password+space+cell phone number”
to set up a authorized number. The other authorized numbers should be set by
the first authorized number. If the number is successfully authorized, the unit

Table of Contents