powerpack GPS-TK303 - 12. Arming & Silent Mode Operations; 6.21 Remote Controller Functions; 6.22 Arming the System

21
engine Succeed”. And it will remain immobile state until next command to resume.
6.20.2 Stop mode
6.20.2.1 Execute immediately: Send command “quickstop+password” to tracker, it will reply
“quickstop OK”. Then tracker will stop the car immediately after “stop” command.
6.20.2.2Execute depends on speed(Default mode): Send command “noquickstop+password”
to tracker, It will reply “noquickstop OK”, Then the tracker won’t stop the car immediately
after “stop” command, instead, it will reply “it will be executed after speed less than
20KM/H”, and stop the car when the speed is less than 20KM/H
6.20.3 Resume the Oil and Power System
send “resume+password" to tracker, it will reply "Resume engine succeed", that
means vehicle has resume the oil supply.。
6.21Function of Remote Controller (Option, for model D
ONLY)
Button
Function
Descriptions
ARM
Press for 0.5 second, the siren will beep one time.
DISARM
Press for 0.5 second, the siren will beep two times.
ARM & Silent
mode
Press for 0.5 second when it is in disarm state, the siren will
beep one time. No voice from siren when alarm triggered and quit from siren
mode automatically when disarm.
SOS
Press for 3 seconds, Tracker will send SOS alert to authorized phone numbers
without voice.
Deterrence/car
search
Press for 0.5 second when it is in arm state, siren will beep 10 seconds, press
disarm button to quit.
6.22 Arm
6.22.1 Set up arm by SMS
Send “arm+password” to tracker, it will make the car enter ARM states and and reply
“Tracker is activated”.