Need help?Do you have a question about the powersoft Quattrocanali 4804 and is the answer not in the manual?
Lists essential safety rules for installation, use, and maintenance to prevent hazards.
Critical warnings and precautions for safe and correct amplifier installation.
Information on AC mains connection, voltage, and breaker requirements.
How to select appropriate gain settings for optimal input sensitivity.
Optimizing performance for very low impedance loads.
Overview of diagnostic systems, GPO, and alarms.
Step-by-step instructions for performing the amplifier self-check procedure.
Explains global fault conditions indicated by LEDs.
Details specific channel faults indicated by LEDs.
Information on network topology and Ethernet/Dante ports.
Guidance on IP addressing for network connectivity.
Explains signal processing and DSP architecture within Armonía.
Details the warranty period, coverage, and exclusions.
How to get assistance from Powersoft or authorized service centers.
Instructions for shipping units to Powersoft for factory service.
Details channel handling and output stage power ratings for the 4804 model.
Information on AC power supply, voltage, and consumption for the 4804.
Specifications for DSP capabilities and networking interfaces of the 4804.
Details channel handling and output stage power for the 2404 model.
Details AC power supply and DSP specifications for the 2404 model.
To Next Page
General