To Next PageTo Next Page
Need help?Do you have a question about the powersoft T Series and is the answer not in the manual?
Explains common symbols used in the manual and their significance.
Provides critical warnings related to the safe operation and environment for the amplifier.
Details European regulatory compliance statements including WEEE directive.
Covers FCC compliance statements for the USA region, including warnings.
Outlines Canadian regulatory compliance statements and warnings.
Lists the items included in the T Series amplifier box.
Guidelines for selecting a suitable installation location and ensuring proper ventilation.
Instructions for cleaning the amplifier chassis and air filters.
Details on connecting the amplifier to the AC mains power supply.
Describes how to connect audio signals to and from the amplifier.
Information on the unit's automatic signal grounding system and best practices.
Explains the AES3 and Dante network audio input connections and protocols.
Details the front panel components including the display and pushbuttons.
Guides users on navigating through the amplifier's menu system.
Instructions on how to switch the amplifier on, off, and to standby.
Procedure for independently muting amplifier output channels.
How to adjust the gain or speaker level for each channel.
Configuration of speaker delay parameters for each channel.
Description of the matrix routing functionality for inputs and outputs.
How to select and prioritize audio sources for amplifier inputs.
Instructions for recalling saved amplifier configurations (snapshots).
How to configure amplifier outputs, including bridging and unbridging.
Loading and managing speaker presets from internal memory or USB.
Settings for managing the amplifier's network configuration and IP addressing.
Viewing network node information and accessing interface lock settings.
Steps for updating the amplifier's firmware via Armonía.
Information on Dante networking support and configuration.
Introduction to the software for system setting and customization.
Illustrations showing recommended rack placement and airflow.
Step-by-step visual guide on how to access and remove air filters.
Technical drawings showing the physical dimensions of the T Series amplifiers.
Pin configuration for the male XLR analog and AES3 input connectors.
Pin configuration for the female XLR analog and AES3 link connectors.
Wiring diagram for the RJ45 network connectors including color codes.
Pin configuration for the NL4 Speakon female output connectors.
Detailed description of front panel controls, ports, and display elements.
Overview of all rear panel input, output, network, and power connectors.
General