To Next PageTo Next Page
Need help?Do you have a question about the powersoft M28Q and is the answer not in the manual?
Essential safety guidelines for operating Powersoft amplifiers safely and correctly.
Important notices and precautions for amplifier installation and use.
Guidance on proper installation location to prevent overheating and malfunction.
Instructions for safe placement and usage to avoid performance degradation.
Fundamental safety rules and compliance requirements for powering the device.
Information on amplifier power capabilities and responsible speaker usage.
Warning about hazardous output voltages and avoiding electrical shock.
Overview of Powersoft's leading position in high efficiency audio power management.
Description of M Series amplifiers designed for touring and live applications.
Explanation of Class D technology benefits for efficiency and performance.
Procedures for safely unpacking the amplifier and checking for shipping damage.
Guidelines for rack mounting M Series amplifiers securely and safely.
Details on the amplifier's intelligent cooling system and ventilation requirements.
Important precautions before powering on and connecting inputs/outputs.
Information on the unit's grounding system and the importance of earth connection.
Instructions for connecting the amplifier to the AC power source safely.
Overview of amplifier connection, operation, and status information.
Procedure for accessing and cleaning the front panel air filters.
Details on front panel controls for gain adjustment and monitoring.
Explanation of front panel LEDs for status and channel indicators.
Description of connectors and indicators on the rear panel.
Guidance on connecting audio signals to M Series amplifiers.
Specific input connection details for MxxD amplifier models.
Specific input connection details for MxxQ amplifier models.
Instructions for connecting loudspeakers to the amplifier outputs.
Information on connecting to low impedance and distributed line systems.
Procedure for connecting amplifiers in bridge mode for increased power.
Details on the Ethernet port for remote control and ID selection.
Explanation of the V Ext terminal for remote on/off switching operations.
Overview of Digital Signal Processing capabilities and functions.
Purpose and applications of DSP operations for signal handling and processing.
Description of the DSP-D board and its integrated features.
Description of available internal processing layouts for DSP modules.
Mechanism to prevent unauthorized changes to presets and macro properties.
Information on the amplifier's remote on/off functionality.
How to manage and select up to 4 presets per module.
Introduction to Powersoft's Armonía software for remote amplifier control.
Guide to setting up remote control for M Series amplifiers via network.
Configuration of network settings for remote device communication.
Setting up the amplifier to obtain an IP address automatically via DHCP.
Automatic IP configuration using link-local addresses without a DHCP server.
Procedure for assigning a fixed IP address using Armonía software.
Steps to revert the device's IP policy back to automatic settings.
Process for discovering and importing devices into the Armonía workspace.
Methods for configuring M Series amplifiers, virtually or on a real device.
Working with virtual devices for configuration before going online.
Selecting the processing layout for a virtual DSP module.
Operating on the physical amplifier unit remotely for immediate audible changes.
Import/export possibilities for presets and configuration files.
Handling internal binary presets for M Series DSP modules.
Importing/exporting equalization curves from input/output tabs.
Importing/exporting channel processing setup from/to a file.
Exporting and importing complete device DSP process dumps.
Saving or opening system files for multi-device configuration.
Controlling DSP parameters remotely via software.
Configuring input routing based on processing layout for MxxD and MxxQ models.
Adjusting input equalization curves and parameters for each channel.
Configuring output equalization based on speaker manufacturer data.
Protecting voice coils from over-powering using RMS and Peak limiters.
Setting RMS limiter parameters to protect against continuous excess power.
Using peak limiter to protect against large signal peaks and excessive voltage.
Algorithm to compensate for cable resistance affecting damping factor.
Preventing changes to presets or macro properties using a locking mechanism.
Managing internal binary presets directly on the device.
Copying and pasting DSP processing setups between channels or devices.
Copying and pasting equalization curves for input and output sections.
Copying and pasting processing setups for individual channels.
Copying and pasting functions between M Series devices in the workspace.
Protection against speaker damage during amplifier power up and down.
Mechanism to protect against output short circuits and low impedance loads.
Systems to prevent damage from overheating via thermal warning and shutdown.
Notification of rising heat sink temperatures and output power reduction.
Automatic muting of channels when heat sink temperature exceeds safe limits.
Protection against DC signals or subsonic energy at the output stage.
Filtering to limit out-of-band noise from input lines affecting output stage.
Instructions for cleaning the amplifier's faceplate and chassis.
Information on obtaining service and contacting authorized personnel.
Procedure for cleaning dust from the front panel air filters.
Using Lantronix software to configure network IP policies for Adau devices.
Configuring the device for automatic IP address assignment via DHCP.
Automatic IP configuration using link-local addresses without a DHCP server.
Setting a fixed IP address for the device using Lantronix DeviceInstaller.
Technical specifications for the Powersoft M14D amplifier model.
Technical specifications for the Powersoft M14D HDSP+ETH amplifier model.
Technical specifications for the Powersoft M20D amplifier model.
Technical specifications for the Powersoft M20D HDSP+ETH amplifier model.
Technical specifications for the Powersoft M28Q amplifier model.
Technical specifications for the Powersoft M28Q HDSP+ETH amplifier model.
Technical specifications for the Powersoft M30D amplifier model.
Technical specifications for the Powersoft M30D HDSP+ETH amplifier model.
Technical specifications for the Powersoft M50Q amplifier model.
Technical specifications for the Powersoft M50Q HDSP+ETH amplifier model.
General