powersoft M28Q User Manual

▶
19
M Series User Guide
the current playing preset.
▶
IMPORT, save a .preset le on the selected slot and recall
that slot.
WARNING: this leads to a couple of seconds interruption of
the audio stream.
WARNING: the data contained in a .preset le irreversibly
modies a preset slot and its internal layout.
6.4.2 Input/Output Curves .icp, .ocp
From the input or output tab of an M Series device, import/export
of the current equalization curve is a straightforward procedure.
FIGURE 33: The output eq: there are 4 possible choices to handle the
curve.
WARNING: all changes will be lost if the preset is NOT stored
on board before unplugging the unit from the mains.
6.4.3 Channel Preset .chp
Import/export of the current playing processing from/to a le is
possible by starting from the device’s layout.
FIGURE 34: All possible channel operations are available by right
clicking on the respective channel.
Imported and/or exported data is:
▶
Input eq
▶
Output eq
▶
Limiters
▶
Damping factor control
WARNING: all changes will be lost if the preset is NOT stored
on board before unplugging the unit from the mains.
NOTE: impor ting channel preset les doesn’t modify the internal
structure of a device. For example, a channel exported from a 1
in / 2 out conguration doesn’t affect the internal structure when
imported in 2 in /2 out processing layout.
NOTE: in the 1 in / 2 out conguration, the input eq is exported
(or applied) to both input eq’s. For example, exporting 1 in /2 out
congurations exports the unique input eq to both channels.
6.4.4 Device preset le .pam
The preset le allows to import/export entire dumps of the
device. An exported .pam le allows to completely replicate the
DSP process on another device. In order to import/export a .pam
le:
▶
Select the device (a blue rectangle will appear)
▶
Right click on the selected device
▶
Click on import/export
When importing a .pam le you’ll be prompted for a decision on
the realignment policy to adopt.
By selecting yes, the device setup is transmitted from the virtual
device to the real device. By selecting no, the device setup is
transmitted from the real device to the virtual device.
WARNING: importing a .pam le leads to a short interruption
of the audio stream.
WARNING: impor ting a .pam le over writes the current preset
slot on the device. Any previous data on the slot will be erased.
FIGURE 35: The .pam import/export operation from the workspace.
Note the blue rectangle on the selected device.
6.4.5 System File .paw
Saving or opening a system le permits the storage of the entire

powersoft M28Q Specifications

General

Brand	powersoft
Model	M28Q
Category	Amplifier
Language	English