Need help?Do you have a question about the powersoft K Series and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Amplifier Technology | Class D |
| Protection | Thermal, Short Circuit, DC, Overload |
| AC Power | 100-240V, 50/60Hz |
| Dimensions | 483 mm |
| Input Type | XLR |
| Damping Factor | >500 |
Steps to safely discharge internal capacitors before servicing.
Procedure for checking MOSFETs on the amplifier board.
Procedure for checking fuses, varistors, and KALSU board.
Comprehensive steps to safely remove the power supply board.
Detailed steps to remove the amplifier output board.
Procedure to remove the KALIN heatsink.
Steps for replacing amplifier fans and drivers.
Steps to remove the K-FRONT display from the front panel.
Procedure to remove and calibrate the K-CNTRL board.
Steps to reset and calibrate channel output current offset.
Procedure for DC voltage testing and connecting test cables.
Steps for updating the amplifier firmware.
Precautions for handling sensitive electrical components.
To Next Page
