To Next PageTo Next Page
Need help?Do you have a question about the powersoft K2 DSP+AESOP and is the answer not in the manual?
Essential safety instructions for operating the amplifier correctly and safely.
Details on product compliance with electrical codes and standards.
Important warnings and information for users regarding device operation and potential hazards.
Fundamental safety rules for powering and operating the amplifier safely.
Advice on using speakers with the amplifier to prevent damage due to high power.
Cautionary advice regarding potential electrical shock from speaker wiring.
Welcomes the user and introduces the Powersoft K Series amplifier technology.
Overview of K Series advanced features, digital control, and Power Factor Correction.
Explains the advantages of Class D technology in terms of efficiency and size.
Highlights the amplifier's complete protection and reliability for continuous operation.
Instructions for unpacking the amplifier and checking for damage.
Guidelines for mounting the amplifier in a standard 19" rack for proper installation.
Details on the forced-air cooling system and its intelligent variable-speed fan.
Precautions to take before making connections and during operation.
Information on the automatic signal grounding system and safety earth connection.
Instructions for connecting the amplifier to the AC mains power supply safely.
Details on connecting analog and AES/EBU audio inputs to the amplifier.
Instructions for connecting loudspeakers to the amplifier outputs using Speakon connectors.
Explanation of how signal polarity is handled internally for symmetrical power supply use.
Information on connecting for remote control via V Ext, serial, or Ethernet.
Guide to using front panel buttons and LCD display for amplifier setup and monitoring.
How to set the amplifier's output attenuation level for channel I, 2, or both.
Guide to selecting input sensitivity for matching with other audio equipment.
How to select between Analog, AES3, and KAESOP input sources for processing.
How to set the maximum output peak voltage levels for amplifier channels.
How to set the maximum mains current draw to prevent circuit breaker tripping.
How to enable/disable the clip limiter to prevent distortion from excessive signal.
How to mute channels individually based on input signal amplitude.
Function to automatically mute all channels when the amplifier is turned on.
Information on the power saving idle mode feature and its settings.
Block diagram and explanation of the DSP processing chain within the amplifier.
Guide to navigating the DSP settings menu.
General DSP settings affecting both channels or global parameters.
Detailed settings available for each individual amplifier channel.
Setup options for individual channels, including delay, EQ, and diagnostics.
Function to turn on/off the input processing block for EQ.
Operation to disable input processing and reset aux delay.
Function to disable output EQ, limiters, and damping.
Introduction to the AESOP standard for bidirectional Ethernet and AES3 digital audio streams.
How K Series amplifiers ensure fault-proof data and audio connections for system robustness.
Overview of network connection types like daisy chain and intermediate chains.
How to set the amplifier's mode (Repeater, Forward) concerning the AES3 stream.
How to set IP addressing strategy (Manual or Automatic) for network configuration.
Manually setting the amplifier's IP address, subnet mask, and default gateway.
Viewing the current networking configuration of the amplifier.
Settings related to audio source selection, mode, and gain trim for AES3 streams.
Choosing amplifier behavior when the digital audio stream is missing.
Screen showing output RMS voltage, current, power, and load impedance.
Displays the current amplifier temperature.
Shows updated mains RMS voltage and RMS current levels.
Accessing functions to display or edit the amplifier's name.
Function to prevent presets from being overwritten by setting a lock code.
Setting the number of locally stored presets that cannot be overwritten.
Instructions for recalling stored presets from the amplifier's local memory.
How to save the current amplifier setup as a preset to local memory.
Procedure for changing the lock code used for the "Lock presets" function.
Function to erase all non-write protected presets from the amplifier's memory.
Accessing information about the amplifier's hardware components and versions.
Accessing current amplifier system parameters like voltages and statuses.
How to set the LCD display contrast using the front panel buttons.
How to activate front panel lock and set an unlock code for security.
How to mute individual amplifier channels using the front panel mute function.
Explanation of output muting during amplifier power-on and power-off cycles.
How the amplifier protects itself and speakers from short circuits or low impedance loads.
How the amplifier's cooling system and thermal sensing protect against overheating.
How the DC detection circuit protects speakers from DC signals or subsonic energy.
Description of the ultrasonic network for protecting against high frequency signals.
Instructions for cleaning the amplifier's faceplate and chassis safely.
Information on where to get the amplifier serviced by qualified personnel.
How to remove and clean dust from the front side air filters.
Details on the product warranty period, coverage, and exclusions.
Procedure for returning defective goods, including obtaining an RMA number.
Powersoft's policy on repairing or replacing defective goods covered by warranty.
Building a custom box to combine Ethernet and AES3 signals in a single RJ45 connector.
Explanation of error codes displayed on the main screen and their meanings.
How to store and recall amplifier presets using a standard-sized SmartCard.
Information on using Powersoft's Armonía Pro Audio Suite for amplifier control.
Technical specifications for the Powersoft K2 amplifier model.
Technical specifications for the Powersoft K2 DSP+AESOP amplifier model.
Technical specifications for the Powersoft K3 amplifier model.
Technical specifications for the Powersoft K3 DSP+AESOP amplifier model.
Technical specifications for the Powersoft K6 amplifier model.
Technical specifications for the Powersoft K6 DSP+AESOP amplifier model.
Technical specifications for the Powersoft K8 amplifier model.
Technical specifications for the Powersoft K8 DSP+AESOP amplifier model.
Technical specifications for the Powersoft K10 amplifier model.
Technical specifications for the Powersoft K10 DSP+AESOP amplifier model.
Technical specifications for the Powersoft K20 amplifier model.
Technical specifications for the Powersoft K20 DSP+AESOP amplifier model.
General