EasyManua.ls Logo

PowerTec 40Hp - Models); Reverse (Automatic Reverse Lock and Power Trim and Tilt Modls); Reverse

PowerTec 40Hp
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Reverse (automatic reverse lock and
power trim and tilt models)
When operating in reverse, go slowly. Do
not open the throttle more than half. Oth-
erwise the boat could become unstable,
which could result in loss of control and
an accident.
Tiller control models
1. Place the throttle grip in the fully closed
position.
2.Move the gear shift lever quickly and
firmly from neutral to reverse.
Remote control models
1. Pull up the neutral interlock trigger (if
equipped) and move the remote control
lever quickly and firmly from neutral to
reverse.
Reverse (manual tilt and hydro tilt
models)
When operating in reverse, go slowly. Do
not open the throttle more than half. Oth-
erwise the boat could become unstable,
which could result in loss of control and
an accident.
Tiller control models
1. Place the throttle grip in the fully closed
position.
2.On models equipped with a tilt lock le-
ver, check that it is in the lock/down po-
sition.
WARNING
WARNING
Functioning

Table of Contents