EasyManua.ls Logo

PowerTec 40Hp - Recommended Engine Oil; Specifications

PowerTec 40Hp
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Specifications
Dimension:
Overall length:
mm (50.4 in)
Overall width:
mm (13.7 in)
Overall height L:
mm (53.1 in)
Transom height L:
533 mm (21.0 in)
Transom height X:
(53.7in)
Transom height S:
mm(16.7 in)
Transom height L:
mm(21.7 in)
Weight (AL)S:
6kg (164 lb)
Weight (AL) L:
84.0 kg (185 lb)
Performance:
Full throttle operating range:
4500–5500 r/min
Maximum output:
29.4 kW@5000 r/min (40
HP@5000 r/min)
Idling speed (in neutral):
1000 x 50 rpm
Engine:
Type:
2-stroke L
Displacement:
703.0 cm3 (42.90 cu.in)
Bore stroke:
80.0 x 70.0 mm (3.15 2.76 in)
Ignition system:
Velocidade de ralentí (en ponto morto):
1000 x 50 rpm
CDI
Spark plug with resistor (NGK): B7HS
Spark plug gap:
0.6–0.7 mm (0.024–0.028 in)
Control system:
Remot control
Tiller
Starting system:
Manual and Electric
Starting carburetion system:
Choke valve
Min. cold cranking amps (CCA/EN):
430.0 A
Min. rated capacity (20HR/IEC):
70.0 Ah
Alternator output:
40hp 80 W
Alternator output for battery CC:
40hp 6.0 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00 (26/13)
Trim and tilt system:
Hydro tilt
Power trim and tilt
Propeller mark:
G
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Fuel tank capacity:
24 L (6.34 US gal) (5.28 Imp.
gal)
Recommended engine oil:
POWERTEC 2-stroke out-
board motor
oil
Maitenance

Table of Contents