EasyManuals Logo

PowerTec 40Hp User Manual

PowerTec 40Hp
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
56
boat bottom can be coated with an anti-foul-
ing paint approved for your area to inhibit
marine growth.
Do not use anti-fouling paint which includes
copper or graphite. These paints can cause
more rapid engine corrosion.
Make sure the main switch (on applica-
ble models) is ā€œā€ (off) before work-
ing on the battery.
1. Red cable
2. Black cable
3. Battery
Disconnecting the battery
Disconnect the BLACK cable from the NEG-
ATIVE (-) terminal first. Then disconnect the
RED cable from the POSITIVE (+) terminal.
Checking top cowling
Check the fitting of the top cowling by push-
ing it with both hands. If it is loose have it re-
paired by your PowertecOutBoards dealer.
Coating the boat bottom
A clean hull improves boat performance. The
boat bottom should be kept as clean of ma-
rine growth as possible. If necessary, the
boat bottom can be coated with an anti-foul-
ing paint approved for your area to inhibit
Coating the boat bottom
A clean hull improves boat performance. The
boat bottom should be kept as clean of ma-
rine growth as possible. If necessary, the
Maitenance

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PowerTec 40Hp and is the answer not in the manual?

PowerTec 40Hp Specifications

General IconGeneral
BrandPowerTec
Model40Hp
CategoryOutboard Motor
LanguageEnglish