SAFETY RULES
1
Be aware of general power tool safety. Make sure all the
safety rules are understood.
• Disconnectthemachinefrompowersourcewhenever
adjusting or replacing any parts.
• Donotplugplanerinunlessswitchisinthe“OFF”
position.
• Keephandsawayfromallmovingparts.
• Weareyeprotectionorfaceshieldduringoperation.
• Makesureallmobilepartsmovefreelyandarefree
from interference.
• Ifceilingmounted,bottomofairfiltrationsystemmust
be at least 7 feet above the floor.
• Ifceilingmounted,mountsmustbeanchoredtobuilding
structure which will support a minimum of at least 100
pounds. Never mount to surfaces such as dry wall or
false ceiling grinds, etc.
• Toreducetheriskofelectricalshock,donotexposeair
filtration to water or rain.
• Neverdustamachinedirectlyintotheairfiltration
system.
• Toavoidapotentiallydangeroussituation,donot
use this machine to filter flammable vapors or smoke.
This air filtration system is designed and intended
for the filtration of air borne wood dust only. It is
neither designed nor intended for any other purpose
whatsoever.
• Usethemachineforfilteringwooddustonly.Notfor
use filtering sheet rock dust, silica, lead paint dust,
asbestos, biohazards, smoke, toxic fumes, spray paint
or flammable liquids.
• Failuretocomplymayresultinseriousinjuryand/or
property damage.
ASSEMBLY
UNPACKING
Refer to Figure 1
•Checkforfreightdamagebeforeopeningthepackage.
If freight damage is noticed, file a claim with the carrier
immediately.
•Checktoensureallpartsareaccountedfor.Ifanyparts
are missing, please contact the customer service center.
• ThisAirFiltrationSystemcomesmostlyassembled.It
requires some additional assembling, installation, and
adjustment before use.
•Locatethefollowingpartsbeforeassembling:
A. Air Filtration Unit
B. Remote Controller
C. Hook Screw (4)
D. Eye Bolt (4)
E. Flange Nut (4)
F. Hook Chain (4)
Figure 1 Unpacking
A
B
C
F
E
D