EasyManua.ls Logo

POWERTECH PLUS MB-3622 - Charger Protections; Electrical and Environmental Protections; Voltage Compensation Feature; Important Safety Instructions

POWERTECH PLUS MB-3622
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROTECTIONS
Full protection against sparks
Short circuit protection
Voltage compensation
Overheating protection
Polarity reversal protection
IMPORTANT SAFETY INSTRUCTIONS
Gases
When the NORMAL/LEAD ACID battery is being charged you
may notice bubbling in the fluid caused by the release of gas. As
the gas is flammable no naked lights should be used around the
battery.
During charging the battery, the charging must be placed at a well
ventilated area. Because of the risk of explosive gas, only connect,
and disconnect, the battery leads when the mains supply is
disconnected.
Types of Batteries
This charger is only suitable for the specified batteries and should
not be used to recharge non-rechargeable, NICAD or any other
type of battery.
Point of Notes
When not in use, the battery charger must be kept at a dry area to
avoid moisture.
Keep away from any liquid, rain or snow at all times.
This battery charger is not designed as a caravan lead acid
battery charger or power supply.
This battery charger is not designed for installation on to the
vehicle as a fixture.
Danger
Avoid getting ELECTROLYTE on your skin or clothes. It is acidic
and can cause burns. If this occurs you shall rinse the affected
area with water immediately.
4

Related product manuals