Powertrain VLCD7 - 5） Unit Selection; 6） Speed Sensor Magnetic Steel Number Setting

TONGSHENG POWERTRAIN TECHNOLOGY CO.,LTD 12/15
functioniseffective,thebootdefaultis0.
5） Unit selection
Underthisinterface,
alsoflicker:
Press
 or key to change the character state on the right
side.Thereareonlytwostates,0and1.0meanstheunitisKm/h,1
meanstheunitismile/h(notshownontheunitpanel).
6） Speed sensor magnetic steel number setting
Underthisinterface:
Press the
 key to increase  the number of magnetic steel, press
the
 key to reduce the number of magnetic steel, the setting