Powertrain VLCD7 - 7） Headlight Control and Display; 8） 6 Km;H Boost Function; 9） Torque Value Display Function

TONGSHENG POWERTRAIN TECHNOLOGY CO.,LTD 8/15
1‐‐‐Fullcharge100%
2‐‐‐About75%fullcharge
3‐‐‐About50%fullcharge
4‐‐‐About25%fullcharge
5‐‐‐Thelightblinkedandthebatteryshouldbe
charged
Note:theabovebatterylevelisdeterminedfor
theuser'sunderstanding.Theactual
batteryleveldependsonthedata
providedbythe
batteryfactory.The
batteryleveldisplayfunctionofthismeteristodisplaythebattery
data.
7） headlight control and display
Headlightswitchmultiplexingkey
:
Pressthe
 buttontoturnonthe  light.
Pressthe
buttonagaintoturnoffthe light.
8） 6Km/h boost function
Boostbuttonandkey
 multiplexing.Whenthebuttonispressed
for 3 seconds, the motor starts, release the button and the motor
stops.
9） Torque value display function
Atthesametime,pressthekey
 andthekey  for10seconds,
andthencontinuetopressthekey
untilthedigitaldisplayonthe
farleftofthedisplaypanelshows7andflashes.Thevaluedisplayed
bythe3‐digitdigitaldisplayontherightsideisthetorque value,as
showninthefigurebelow: