TONGSHENG POWERTRAIN TECHNOLOGY CO.,LTD 14/15
The fault code is issued by the controller, and according to the
different definition of the controller, the code displayed by the
instrument is also different. The following table is the typical fault
displaycodewhenmatchingtheTSmiddlemotor:
VLCD7displayfaultcodetable(withTS
middlemotor)
faultcode causeoffault Faultdescription
ERROR‐01 Temperatureprotection
ERROR‐02 Shortcircuitprotection
ERROR‐03 Controllerfailure
ERROR‐04 Turnthefault
ERROR‐05 Brakehandleprotection
ERROR‐06 torquesensorfailure
ERROR‐07 Locked‐rotorprotection
ERROR‐08 Undervoltage
ERROR‐09 overvoltage
ERROR‐10 Halloffailure
ERROR‐11 Communicationfailures
ERROR‐12 Controller5VorADCfailure
ERROR‐13 Drivingpowerfailure(12V)
ERROR‐14 Drivecircuitfault