UPS Maintenance
17
Powerware
®
3115 User’s Guide
S
www.powerware.com
Testing New Batteries
NOTE It is recommended thatthe UPSchargefor 24 hoursbefore testing the new
batteries.
Press and hold the button for three seconds to initiate the battery
test. The UPS automatically distributes some of the load to the batteries
for 15 seconds and tests the battery’s performance. If there is a problem
with the battery, the UPS returns to Normal mode and the alarm beeps.
For more information, see “Troubleshooting” on page 23.
Recycling the Used Battery
Contact your local recycling or hazardous waste center for information
on proper disposal of the used battery.
WARNING
S
Donot disposeof batteryor batteriesin a fire. Batteriesmay explode. Proper
disposalof batteriesisrequired.Refer toyour localcodesfor disposal
requirements.
S
Donotopenormutilate thebatteryorbatteries.Released electrolyteisharmfulto
the skin and eyes. It may be toxic.
CAUTION
Donotdiscardthe UPSortheUPSbatteriesin thetrash.Thisproduct containssealed,
lead-acidbatteriesand must be disposed ofproperly. For moreinformation, contact
your local recycling or hazardous waste center.
To Next Page
Loading...
