26 PowerXL
™
SplitBrew
™
Instructions for Use
SNEAK-A-CUP Feature
Ifyouremovethecarafeduringthebrewingprocess,thebrewingprocess
willpause.Returnthecarafetothecoffeemakerwithin30secondstoprevent
overow.Whenthecarafeisreturnedtothecoffeemaker,brewingwillresume.
Brew Later Function
If BREW LATER function has not been previously set:
1. After the appliance’s digital clock has been set (see the SETTING THE
DIGITAL CLOCK section), press the BREW LATER (“COLAR DESPUÉS”)
button.ThelightnexttoBREWLATER(“COLARDESPUÉS”onthedisplaywill
illuminateandashoncepersecond.
2. TheclockonthedisplaywillshowthepreviousBREWLATERtimethatwas
programmed. If a BREW LATER time has never been set on the appliance or
the appliance has been unplugged since the last time the BREW LATER time
wasset,theBREWLATERtimedefaultsto12:00am.
3. While the BREW LATER time on the display is blinking, use the HR and MIN
buttons to program the BREW LATER time.
4. PresstheBREWLATERbuttonagaintoconrmtheBREWLATERtime.
Thetimewillalsobeconrmedifnobuttonsarepressedfor4seconds.
5. Thecoffeemakerwillbeginbrewingcoffeeattheprogrammed
BREW LATER time.
If BREW LATER function is already set:
6. PressBREWLATERbuttontochecktheBREWLATERtime.Theclockwill
ashoncepersecondanddisplaytheBREWLATERtimefor4seconds.
At this point, you may reset the BREW LATER setting if desired.
7. You can press the BREW LATER button to check the programmed
BREWLATERtime.Theclockwillashoncepersecondanddisplaythe
programmedBREWLATERtimefor4seconds.Whiletheclockisashing,
you can use the HR and MIN buttons to adjust the BREW LATER time.
8. To cancel the BREW LATER function, press and hold the BREW LATER button
for 3 seconds.
9. Afterpressingnobuttonsfor4seconds,theclockwillrevert
to the current time.
Note: Even though BREW LATER is disabled, the BREW LATER time
willstillbestoredunlessthecoffeemakerisunplugged.