Powrmatic CPx 150 User Manual

Stamm International Corporation
PO Box 1929
Fort Lee, NJ 07024
Tel: 201-947-1700
Fax: 201-947-9662
E-mail: stamminc@pobox.com
Stamm International HQ
www.powrmatic.co.uk
www.powrmatic.co.uk
®
Powrmatic Limited
Hort Bridge, Ilminster
Somerset
TA19 9PS
tel: +44 (0) 1460 53535
fax: +44 (0) 1460 52341
e-mail: info@powrmatic.co.uk
web: www.powrmatic.co.uk
Powrmatic Ireland
45 Broomhill Close
Tallaght
Dublin 24
tel: +353 (0) 1452 1533
fax: +353 (0) 1452 1764
e-mail: info@powrmatic.ie
web: www.powrmatic.ie
Getting In Touch
Powrmatic pursues a policy of continues improvement in both design and performance of its products and therefore reserves the right to change, amend or
vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested
parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure.
EURO-AIR
QUALITY
ICOM
Energy Association
More information is available from our website by scanning the following QR code.
CPx
User, Installation & Servicing Manual
Issue 2.9 November 2018
Doc Ref: M201 Issue 2.9 Nov 2018
ErP COMPLIANT
SEPTEMBER 2018

Powrmatic CPx 150 Specifications

General

Brand	Powrmatic
Model	CPx 150
Category	Heater
Language	English

Summary

User Instructions

Checks before operating the Air Heater

Preliminary checks to perform before lighting the heater.

Operating the Air Heater

Procedure for starting and operating gas and oil-fired heaters.

To Shut Down the Air Heater

Description of Operation

Explanation of the heater's start-up, operation, and shutdown sequences.

Fan and Limit Control

Maintenance

Recommendations for regular servicing and safety precautions.

1.2 Technical Data

Riello Burner Settings

Technical data for burner settings with Natural Gas, Propane, and Oil.

Electrical Loadings

Heater Specifications

1.3 General Requirements

1.3.2 Location

1.3.4. Electrical Supply

1.3.5 Flue System

1.3.6. Gas Fired Heaters

Specific requirements and related documents for gas heaters.

1.3.7. Oil Fired Heaters

Specific requirements and related documents for oil heaters.

1.3.8. Combustion & Ventilation Air Supply

Requirements for combustion and ventilation air for different installation types.

1.3.9. Air Distribution System

Information on air delivery systems for freeblowing and ducted units.

2.1 Fitting the Unit

2.1.1 Fitting space requirement

Specifies required clearances for unit installation.

2.1.2. General

2.1.3. Installing the Heater

2.1.4. Gas & Oil Connections

2.4 Electrical Cable Installation

2.4.1. Electrical Connections

2.4.2. Typical Wiring Installation

Wiring Details

2.5 Wiring Diagrams

2.5.1 CPx30-90 1Pha Gas/Oil Heater Main Internal Wiring Diagram

2.5.2 CPx120-200 3Pha Gas/Oil Heater Main Internal Wiring Diagram

2.5.3 CPx250-300 3Pha Gas/Oil Heater Main Internal Wiring Diagram

2.6 Commissioning and Testing

2.6.1. Electrical Installation

2.6.2. Gas Installation

2.6.3. Oil Installation

2.6.4. Air Distribution System

2.6.5. Lighting Gas Fired Heaters

Procedures for lighting gas-fired heaters, including controls and sequence.

2.6.5.2. Oil Fired Heaters

Procedures for initial startup and adjustments for oil-fired heaters.

2.7 Servicing

General Servicing Requirements

Burner Maintenance

Fan and Heat Exchanger Servicing

3.1 Fault Finding

3.1.1. Heater General

Troubleshooting for general heater issues like not turning on or high limit trips.

3.1.1.1 BSD/RSD (Gas)

Fault indications and causes for gas burners.

3.1.1.2 BSD/RSD (Gas)

Troubleshooting for ignition failures and burner start issues.

3.3 Fuel Conversion

3.3.1. Oil Conversion Steps

Steps for converting oil fuels, including nozzle and pressure adjustments.

3.3.1.1. Burner Nozzle Conversion

3.3.1.2. Oil Pressure Settings

3.3.1.3. High/Low Pump Adjustment

3.3.2. Gas Conversion

Steps for converting between natural gas and propane.