To Next PageTo Next Page
Need help?Do you have a question about the Powrmatic CPx300 and is the answer not in the manual?
Steps and information required for making a guarantee claim.
Requirements for the heater to remain under guarantee.
Items and conditions not covered by the guarantee.
Essential checks to perform before starting the heater.
Step-by-step guide for igniting the heater.
Procedures for turning the heater off for short or long periods.
Explanation of the heater's operational sequences and modes.
Recommendations for regular servicing and upkeep of the heater.
Critical safety notes, including access and material handling.
Checks and advice before installing the heater.
Guidelines for choosing a suitable location for the heater.
Air vent requirements for B23 type installations.
Specific air supply values for different installation scenarios.
Requirements for flue connection, height, and runs.
Specific distances and locations for chimney terminals.
Guidance on wiring and final connections for mains supply.
Ensuring electrical safety compliance before operation.
Inspection, testing, and purging for gas installations.
Inspection and testing requirements for oil installations.
Verifying ductwork and air path arrangements.
Procedures for gas heater startup, soundness, and final adjustments.
Steps for initial startup of oil-fired heaters.
Table of model specifications, including volume and resistance.
Frequency and general procedures for yearly maintenance.
Instructions for servicing the burner unit.
Steps for cleaning the heat exchanger components.
Procedures for inspecting and cleaning the fan assembly.
Steps for removing and replacing the gas control block.
Instructions for replacing fan motors, including belt tensioning.
Detailed steps for replacing the Honeywell fan/limit thermostat.
Actions to take when the main burner fails to light.
Causes and solutions for the main fan running continuously.
Formula and factors for calculating flue system resistance.
General
