Poynting MIMO-3-V2 - Packing Checklist

4 A-MIMO-0003-V2_PCL
Packing Check List
1
The appearance of each component
Antenna Unit
Adhesive Foam Discs 10mm Threaded Spigot
6x (M4 x 12mm)
Stainless Steel Screws
Plastic Nut
*SMA(f) to RP-SMA(m)
Adapter
50mm Threaded Spigot
Grip Extenders Cable Clips
Spigot Seal
*Antenna with Wi-Fi only