PPA JETFLEX - User Manual

¡ATTENTION!
Do not use this equipment
without rst reading the
User’s Manual.
JETFLEX NON-STOP
AUTOMATIC BARRIER
Technical Manual
P31493 - 08/2022
Rev. 0
All images in this manual are for illustrative purposes only.
Manufactured by: Motoppar Indústria e Comércio de Automatizadores Ltda
Av. Dr. Labieno da Costa Machado, 3526 - Distrito Industrial - Garça - SP - CEP 17406-200 - Brasil
CNPJ: 52.605.821/0001-55
www.ppa.com.br | +55 14 3407 1000

Summary

Installation Location

Preparing the Installation Location

Details on how to prepare the installation site, including conduit and cable routing.

Technical Specifications

Linear Barrier Specifications

Technical specifications for the linear non-stop automatic barrier.

Articulated Barrier Specifications

Technical specifications for the articulated non-stop automatic barrier.

Equipment Dimensions

Visual representation and dimensions of the barrier equipment.

Building the Base Plate

Installing the Barrier

Balancing the Barrier and Checking the Belt

Adjusting the Magnet Bar

Operation

TRIFLEX CONNECT AC Control Board

Details on the control board with a frequency inverter for motor operation.

Encoder System (Digital Reed)

Description of the encoder for monitoring barrier position and movements.

PPA JETFLEX Specifications

General

Category	Automatic Barriers
Frequency	50/60 Hz
Protection Class	IP54
Model	JETFLEX
Barrier Length	Up to 6m
Control Options	Remote control, push button, loop detector