13
GEAR SHIFTING
Reduce throttle before shifting. Never increase the throttle while shifting
gears.
Pull in the clutch lever, located on the left hand grip.
Depress the Shift lever to place the gear in 1st, lift up the lever to shift to 2nd, 3rd, 4th and
5th.
Do not place your foot on the gear-shifting pedal while operating the dirt bike to avoid clutch
damage caused by accidental gear shifting.
Model 110 Series
Shifting sequence
(N) Neutral
(1) 1st gear
(2) 2nd gear
(3) 3rd gear
(4) 4th gear
Model 125 Series
Shifting sequence
(1) 1st gear
(N) Neutral
(2) 2nd gear
(3) 3rd gear
(4) 4th gear
Points for Attention during Drive
1. To warm the engine let engine idle. Do not rev the engine to prevent damage to the
engine components.
2. The clutch will wear out quickly if the dirt bike is operated with the clutch in a semi-
engaged position.
3. Shift to the low speed gears when you feel that there is insufficient power to climb hills or
continue forward.
To Next Page
Loading...
