Why does the beam appear dim on my PR Lighting NOVA PR-2013D Controller?
If the beam from your PR Lighting Controller appears dim, it might be due to the lamp reaching the end of its life. Another possible reason is that the optics are not clean. Check the lamp and clean the optics to resolve this issue.
How to troubleshoot a PR Lighting Controller projector that does not start?
If your PR Lighting Controller projector does not start, verify whether the fuse on the socket is blown. Also, check if the lamp is in good condition.
What to do if PR Lighting NOVA PR-2013D projector does not respond to commands?
If your PR Lighting Controller projector switches on but does not respond to commands, make sure the projector is configured correctly. Also, check the XLR cable to ensure it is in good working order.
What to do if my PR Lighting Controller has defecting projection?
If the projection from your PR Lighting Controller is defecting, inspect the lenses for any breakage. Also, remove any dust or grease that may have accumulated on the lenses.
Why is my PR Lighting NOVA PR-2013D Controller only functioning intermittently?
If your PR Lighting Controller only functions intermittently, inspect the fan to ensure it is working correctly and is not dirty.
What to do if my PR Lighting Controller projection has a halo?
If you're experiencing a halo effect with your PR Lighting Controller's projection, carefully clean the lamp and the lenses of the optical group.
General| Brand | PR Lighting |
|---|---|
| Model | NOVA PR-2013D |
| Category | Controller |
| Language | English |
To Next Page