Nova manual.doc
10/12
PROBLEM RESOURCE
The projector does not start Check the fuse on the socket is blown or not.
Check if the lamp is good or not.
The projector switches on but does not
answer to commands
Check the projector is correctly configurated.
Check the XLR cable is good.
The projector only functions
intermittently
Check the fan is working and not dirty.
The beam appears dim Check the lamp is not at the end of its life.
Check the optics are clean.
Projection with halo Carefully clean the lamp and optical group lenses.
Defecting projection Check the lenses are not broken.
Remove dust or grease stored on lenses.
Power supply: 230V AC 50Hz
Other Voltages Available To Order
240V, 220V, 200V AC 50/60Hz
Power consumption: 280W at 220V
Lamp: MSD250W
Channels: 3 channels
Signal: Standard DMX 512
Control mode: Sound activation, Auto programmes, Controller
Running mode: Stand-Alone mode, Master/Slave synchro mode, Controller mode
Colours: 9 colours + white （2 of 9 colours are in gobo wheel）
Gobos: 7 gobos + open
Strobe: Adjustable from 1 ~ 7 F. P. S
Beam coverage: 13°(available 20°by change a set of lenses provided)
Net weight: 9.8kg
Others: Auto thermal cut-off / Manual adjustable focus / Rainbow effect /
Slide function
TECHNICAL DATA
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General