Need help?Do you have a question about the PR 3104 and is the answer not in the manual?
General| Model | PR 3104 |
|---|---|
| Category | Media Converter |
| Fiber Ports | 1 |
| RJ45 Ports | 1 |
| Fiber Connector | SC |
| Wavelength | 1310 nm |
| Operating Temperature | 0°C to 50°C |
| Data Rate | 10/100 Mbps |
| Fiber Type | Single Mode |
| Power Supply | 5V DC |
Instructions to avoid electric shock and fire, emphasizing compliance and proper installation.
Measures for applications with hazardous voltages, including spacing and electrostatic discharge.
Details for qualified personnel on connecting the device and compliance with national legislation.
Requirements for installations in Division 2 or Zone 2 areas, including enclosure and power supply.
Guidelines for safe installation in Zone 2, emphasizing qualified personnel and enclosure protection.
Features like separate supply, parameterization, approvals (CE, UL, DNV, GL, ATEX, IECEx, FM), and loop supply.
Designed for automation and process industries, including signal conversion, isolation, and use in high vibration environments.
List of approvals including DNV, GL, ATEX, IECEx, cFMus, EMC, LVD, UL, and Safe Isolation standards.
Instructions on configuring devices 3104, 3105, 3109 using DIP-switches.
Table detailing input and output configurations for model 3104 based on DIP-switch settings.
Table detailing input and output configurations for model 3105 based on DIP-switch settings.
Table detailing input and output configurations for model 3109 based on DIP-switch settings.
To Next Page
