Need help?Do you have a question about the PR 9113 and is the answer not in the manual?
General| Brand | PR |
|---|---|
| Model | 9113 |
| Category | Media Converter |
| Language | English |
Important safety warnings and precautions to be observed before and during device operation.
Guidelines for safe installation, operation, and maintenance of the device, including definitions.
Instructions for proper mounting of the device, emphasizing qualified personnel.
Procedures for calibrating and adjusting the device, requiring safe tools and adherence to specifications.
Details on advanced functionalities like configuration, monitoring, and data copying.
Key technical specifications including LEDs, galvanic isolation, and input types.
Diagram illustrating input and output signal connections and hazardous area classifications.
Details on environmental conditions, protection degrees, and installation requirements.
Specifications for isolation voltage, signal-to-noise ratio, and response times.
Tables detailing absolute accuracy and temperature coefficient for various input types.
Details on RTD input types, temperature ranges, and related standards.
Details on Thermocouple input types, temperature ranges, and associated standards.
Specifications for current input ranges, output ranges, load capacity, and error detection.
Details on the 4-20 mA 2-wire transmitter output, including load stability and supply voltage.
Certifications related to marine use and specific hazardous area classifications (I.S. / Ex).
Information on the device's compliance with Safety Integrity Level (SIL) standards.
Details on configuring sensor error detection settings and behavior.
List of international standards (IEC 61508, IEC 61326) the product complies with.
Critical safety parameters including PFH, PFD, Safe Failure Fraction, and SIL capability.
Procedure for performing periodic proof tests to ensure safety function reliability.
Parameters related to Channel 1 configuration for safety applications.
Parameters related to Channel 2 configuration for safety applications.
Steps for verifying the device configuration when a password is set.
Procedure for correcting incorrect parameters and performing a functional test.
To Next Page
