9106 - Product Version 9106-001 17
Signal and sensor error indication via display front 4501
Sensor error (loop break) is shown in line 1 on the display by flashing and .
The actual mA value is also shown followed by an explanatory text. Channel
1 is shown in line 2 and channel 2 is shown in line 3 on the display.
Line 4 on the display shows the condition of the COM (flashing bullet) indicating
correct functioning of 4501.
Advanced functions
The unit gives access to a number of advanced functions which can be reached
by answering “Yes” to the point “adv.set”.
Display setup: Here you can adjust the brightness contrast and the backlight.
Setup of tag numbers with 5 alphanumerics. Selection of functional readout
in line 2 and 3 on the display - choose between readout of loop current or
tag no. When selecting ”ALT” the readout toggles between loop current and
tag no.
Password: Here you can choose a password between 0000 and 9999 in order
to protect the unit against unauthorised modifications to the configuration.
The unit is delivered default without password.
Language: In the menu ”LANG” you can choose between 7 different language
versions of help texts that will appear in the menu. You can choose between
UK, DE, FR, IT, ES, SE and DK.
Power rail: In the menu ”RAIL” you can choose if a signal is transmitted to the
central surveillance in the PR 9410 power control unit when the signal limits
are exceeded..
*Safety Integrity Level (SIL): See Safety Manual for details.
To Next Page
Loading...
