PR 9106B - Technical Characteristics

6 9106 - Product Version 9106-001
HART
®
TRANSPARENT REPEATER
9106
• HART
®
transparent repeater for 2-wire transmitter
• Active / passive mA input / output
• 1 or 2 channels
• * SIL 2-certified via Full Assessment according to IEC 61508
• * SIL 3 applicable through redundant architecture
Advanced features
• 9106hasactive/passivemAinputandoutput.
• ThePR4501canbeusedtodefinehighandlowlimitsfordetectionofloop
current level. If these limits are exceeded, the status relay will activate.
• Inthe1-channelversionthestatusrelaycanbeusedasasimplelimitswitch.
• Thedeviceautomaticallydetectswhetheritisconnectedtoanactiveora
passive output.
• Advancedmonitoringofinternalcommunicationandstoreddata.
• *Inacombinationof2devicesthesafetysystemcanreachaSIL3.
Application
• Thedevicecanbemountedinthesafeareaandinzone2/div.2andreceive
signals from zone 0, 1, 2, 20, 21 and 22 / Class I/II/III, Div. 1, Gr. A-G.
• Powersupplyandsignalisolatorwith2-wayHART
®
communication for
2-wire transmitters.
• Dualchannelversionscanbeusedforsignalsplitterapplications.
• Monitoringoferroreventsandcablebreakageoninputviathestatusrelay
and/or a collective electronic signal via the power rail.
• *The9106hasbeendesigned,developedandcertifiedforuseinSIL2
applications according to the requirements of IEC 61508.
Technical characteristics
• 1greenand2redfrontLEDsindicateoperationstatusandmalfunction.
• 2.6kVACgalvanicisolationbetweeninput,outputandsupply.
• Canbesuppliedseparatelyorinstalledonpowerrail,PRtype9400.
CONTENTS