Pratissoli MW45 - Repair Tools

MW
53
4. REPAIR TOOLS
Pump maintenance can be carried out with simple component disassembly and reassembly tools. The
following tools are available:
For assembly:
- Shaft (con-rod interlocking) cod. 27566200
- Bearing on bend shaft cod. 27604700
- Pinion bearing on reduction gear box cod. 27604900
- Bend shaft bearing on the reduction gear box cod. 27605000
- Bend shaft bearing on the bearing cover cod. 27605000
- Piston guide oil seal cod. 27605300
- Bearing on pinion cod. 27604800
- Pinion seal ring cod. 27605200
- Outlet valve housing O-ring MW32-MW36-MW40 cod. 27516000
For disassembly:
- Piston guide oil seal cod. 27918500
- Shaft (con-rod interlocking) cod. 27566200
- Outlet and suction valve unit cod. 27516400
- Suction valve housing MW32-MW36-MW40 cod. 27516200
- Liner block + seals support cod. 27632500