English
11
Series 321
4.5 Levelling the balance
• Adjust the two adjustable feet (6) so that the air bubble in the level control (5) below the buttons on the control
panel (3) lies precisely in the centre of the sight glass marking.
5
Wrong Right
4.6 Calibrating the balance
• Press the key to switch on the balance.
• Press the
key until the20-character info
line (12) in the display (4) shows
«CALIBRATION».
The balance begins the calibration process.
• Follow the instructions in the info line (12) and the
eight-digit measurement display (13).
NOTE
The balance must be recalibrated each time its location is changed.
To Next Page