Precise Instrument DAT 400 - Analog Output Calibration; Adjusting Analog Offset (Calibration)

Page 37
SEr1aL
SET
FUN
AnaLoG
f-sCaL
NodE
AnzEro
tEst
ranGE
offsEt
0
0
0
0
0
0
ConF1G
PRG
SET FUN
SET FUN
SET FUN
SET FUN
SET FUN
SET FUN
SET
FUN
PRG
Enter Value
PRG
PRG
Select Value
PRG
PRG
Enter Value
PRG
PRG
Select Value
PRG
PRG
Select Value
PRG
PRG
-0-
-Fs-
PRG
PRG
SET FUN
0
Set Offset
offsEt ADJUSTING THE OFFSET (CALIBRATION)
Measure the analog output value with a multimeter to perform the
calibration of zero (0) and full scale (FS).
Use the
SET
and
FUN
keys to adjust the analog output. Press and
hold down the key for a rapid change.
Press the
0
key to toggle between offset of zero and that of full
scale.
Press the
PRG
key to return to the OFFSET sub-menu. Press the
0
key to return to the ANALOG menu.