Need help?Do you have a question about the Precision Power PCX 2200 and is the answer not in the manual?
General| Brand | Precision Power |
|---|---|
| Model | PCX 2200 |
| Category | Car Amplifier |
| Language | English |
Guide for diagnosing no sound issues based on LED status and wire checks.
Steps to diagnose and resolve single-channel audio problems by checking connections.
Steps for when initial troubleshooting steps for no sound do not resolve the issue.
Information on installing in-line fuses or circuit breakers to protect the vehicle from fire.
Guidelines for disconnecting the battery and routing wires to avoid noise and shorts.
Details AP-IV protection modes: Short Circuit and Thermal Protection.
Instructions on connecting power and ground cables using PowerLock connectors.
Details AM-V protection for temperature and impedance issues.
Warns that low battery voltage can cause overheating and damage.
Explains the Total Control X-over (TC-X) for system flexibility.
Advises maintaining clearance around cooling plenums for proper operation.
Switches to select HPF/LPF/FULL function for speaker and RCA outputs.
Controls to adjust the crossover frequency for speaker and RCA outputs.
Connects RCA cables and provides RCA outputs to other amplifiers.
Controls for matching source unit level and handling high voltage input.
Selects frequency centers for bass boost.
Step-by-step guide to adjust amplifier input gain for optimal performance.
Instructions for routing and connecting speaker wires using PowerLock connectors.
Details on using RCA inputs and the -12dB input attenuation switch.
How to bridge two-channel amplifiers for mono output, noting impedance requirements.
Details the noise-reducing input stage design for improved signal clarity.
Describes rear panel connections including power, ground, and QBASS controls.
Describes the heatsink design for superior heat dissipation.
Details the thermally controlled fan system for cooling the amplifier.
Instructions for preparing metal surfaces and attaching ground wires securely.
How to run stereo and mono speakers simultaneously from one amplifier.
Advice on upgrading charging systems for high power demands.
Formula and guide for determining current draw and required wire gauge.
Chart providing recommended minimum wire gauges based on current draw and length.
Details the QBASS PLUS bass control feature and its settings.
Warns against abusing QBASS PLUS™™ as it can damage speakers.
Mentions the optional dash-mounted remote control for QBASS PLUS.
A chart detailing crossover detents and corresponding frequencies.
Advises against self-servicing and directs users to authorized dealers.
Warns about potential hearing loss from extended high-volume audio system use.
Outlines the limited warranty terms for authorized and non-authorized installations.
To Next Page
