To Next PageTo Next Page
Need help?Do you have a question about the Precision Power PC21400 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power at 2 Ohms | 200W x 2 |
| Bridged RMS Power at 4 Ohms | 400W x 1 |
| Input Sensitivity | 200mV - 6V |
| THD at Rated Power | 0.02% |
| S/N Ratio | 110 dB |
Provides RMS output power ratings for PC2400, PC2600, and PC21400 models.
Explains how to adjust frequency centers and Q selection for the QBASS PLUS feature.
Lists tools and parts needed for installation that are not included.
Specifies fuse ratings for amplifier installation based on model and quantity.
Guide to determine recommended minimum wire gauge based on current draw and length.
Provides a step-by-step guide to accurately set the amplifier's input gain.
Guides users through checking power, ground, and LED status for no sound issues.
Provides steps to identify and resolve issues with sound only in one channel.
Explains common reasons for amplifier output reduction like overheating or low impedance.
Outlines the warranty coverage for authorized vs. non-authorized installations.
