Need help?Do you have a question about the PRECITEC Lasermatic LightCutter and is the answer not in the manual?
Details warranty terms and Precitec's liability limitations for product use and modifications.
Explains the meaning of warning, caution, and informational symbols used throughout the manual for clarity.
Outlines essential responsibilities of operators and personnel for safe machine operation and adherence to instructions.
Covers crucial safety precautions for electrical shock, moving parts, laser radiation, and environmental factors.
Provides guidance on actions to take in emergency situations, including power disconnection and fire safety.
Provides an illustrated overview of the laser head, identifying key components and their locations.
Details functional aspects, including the collimator, focusing lens, distance controller, and cutting gas system.
Lists key technical data such as wavelength, laser power, focal lengths, dimensions, and operating parameters.
Describes various product versions (straight, angled, 3D) and provides their relevant mechanical dimensions.
Lists optional accessories such as analysing electronics and service cases for the laser head.
Highlights critical safety precautions and general regulations prior to and during installation processes.
Guides users on verifying the completeness and condition of supplied parts before starting installation.
Step-by-step instructions for fitting essential components like the ceramic part, nozzle, and laser fibre.
Details the procedures for connecting the cutting gas, cooling water, and distance sensor systems.
Emphasizes essential safety precautions to be observed before and during the system commissioning phase.
Provides detailed steps for centring the laser beam and setting the focal position correctly.
Outlines the process for checking and setting the appropriate standoff distance between the nozzle and workpiece.
Lists essential safety guidelines to be followed when performing any maintenance tasks on the laser head.
Summarizes recommended maintenance tasks, frequency, and general procedures for upkeep.
Covers detailed procedures for replacing worn or damaged components like ceramic parts, nozzles, and sensor inserts.
Introduces the 3D version, its product view, and general characteristics.
Details installation steps specific to the 3D version, including component fitting and connections.
Explains maintenance tasks and component replacements pertinent to the 3D version of the laser head.
Highlights essential safety precautions to be observed during troubleshooting and error analysis.
Lists common malfunctions, their causes, and recommended actions for electrical and mechanical issues.
Contains supplementary data including unit conversions, air quality standards, and cooling water parameters.
Lists available spare parts, their designations, and corresponding order numbers for reference.
To Next Page
General